LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Forte LX, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Engine Control System Diagnosis - 2.0L GDI (3 Of 3)) >> DTC P2128: Accelerator Position Sensor 2 Signal Circuit High Input >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Item Detecting Condition Possible Cause
DTC Strategy
  • APS2 signal check, high
  1. Poor connection
  2. Short to battery in Signal Circuit
  3. Open in Ground Circuit
  4. Faulty APS
  5. Faulty ECM/PCM
Enable Conditions
  • Ignition "ON"
Threshold Value
  • APS2 voltage is higher than 2.4V
Diagnostic Time
  • Continuous
MIL On Condition
  • 1st Driving Cycle