Propeller (Prop) Shaft Removal And Installation Method (TJ27295)

WARNING: This page is about the S60 T-5, Automatic, which is a different variant/trim than selected.

Publication date: 2013-01-14
Reference number: TJ27295

PROPELLER (PROP) SHAFT REMOVAL AND INSTALLATION METHOD

TECHNICAL SERVICE BULLETIN

Reference Number(s): TJ27295, Date of Issue: January 14, 2013

VOLVO:	2007 and beyond
SECTION:	Propeller Shaft
GROUP:	4510
NO.:
RELATED REF. NUMBER(S):	TJ27295

ATTACHMENT

ATTACHMENT DESCRIPTION

File Name	File Size
Attachment TJ 27295.pdf	0.0339 MB

VEHICLE TYPE

Type	Eng	Eng Desc	Sales	Body	Gear	Steer	Model Year	Plant	Chassis range	Struc Week Range
1XX					6		2007-9999		-	0-0

CSC CUSTOMER SYMPTOM CODES

CODE DESCRIPTION - CSC

Code	Description
NY	Automatic transmission/Vibration
W2	Front/rear axle/Vibration/shake

DTC

Diagnostic Trouble Codes

TEXT

NOTE: If using a printed copy of this Technical Journal, first check for the latest online version.

DESCRIPTION

On some All Wheel Drive (AWD) variants, the current version of VIDA at the time of the creation of this TJ is missing a step in the prop shaft removal and installation method for an AWD P3* vehicle.

Skipping this step and incorrectly installing the prop shaft bearing support brackets could result in a driveline vibration upon acceleration.

*AWD P3 = 2007-S80, 2008-XC70, 2010-XC60, 2011-S60

PRODUCT MODIFICATION

The procedure will be updated in VIDA 2013B.

SERVICE

When following the prop shaft removal and installation method in VIDA, the photograph in the attachment should be used as a reference for all AWD P3 prop shaft removal and installation. The illustration may vary but the theory is the same. Note the orientation of the prop shaft bearing support brackets before removal. There are differently shaped holes on the brackets so that the correct orientation can easily be seen.

To view TJ attachment continue to information below:

TJ INSTRUCTION PROP SHAFT REMOVAL AND INSTALLATION METHOD