Floor Jack Or Hoist

When lifting the vehicle, the correct jacking points given below must be used. See Fig 1 . The jacking plate must have a rubber pad to prevent damage to the vehicle.

For the front of the vehicle, a wooden load relief plate (200 x 200 x 20 mm) must be used behind the sub-frame bracket. For the rear of the vehicle, a wooden spacer (170 x 80 x 50 mm) must be used at the front of the sub-frame bracket.

Fig 1: Identifying Vehicle Jacking & Hoisting Points

Courtesy of VOLVO CARS OF NORTH AMERICA.