LEMON Manuals: Even more car manuals for everyone
Home >> Triumph >> 1969 >> Spitfire Standard Trans >> Repair and Diagnosis (Single Page) >> Transmission >> Clutches >> Overhaul >> Clutch Slave Cylinder

Clutch Slave Cylinder

  1. Remove slave cylinder as previously outlined. Remove snap ring. Using low air pressure applied to cylinder, remove piston and spring.
  2. Clean all components in alcohol or brake fluid. Do not use gasoline or any type of solvent. Coat all component with brake fluid before assembly. To assemble, reverse disassembly procedure.
    Fig 1: SLAVE CYLINDER COMPONENTS (TYPICAL)
    G09349286Courtesy of NOT AVAILABLE
scientia non olet · About LEMON Manuals