Removal [03/2019 - ]: Procedure

Refer to REMOVAL [03/2019 - ]

1. Unscrew the nut (1) in the area of the spring strut.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Slightly raise the rear wheel hose liner (2).
   NOTE:

   The wheel arch cover will not be removed.

3. Undo E11 bolt (2) and remove the rear skid control sensor wire.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

4. Detach the rear skid control sensor wire cable from the brackets (1).
5. Detach the rear skid control sensor wire cable from the brackets (1).

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

6. Unlock plug connection (2) and disconnect.