Removal [10/2017 - 12/2021]: Procedure

Refer to REMOVAL [10/2017 - 12/2021]

1. Remove the 3 nuts and No. 1 front floor heat insulator from the vehicle.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disconnect the air fuel ratio sensor connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Disengage the 2 clamps.
3. Using SST, remove the air fuel ratio sensor from the exhaust manifold.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   • SST: 09224-00012 
   NOTE:

   If the air fuel ratio sensor has been struck or dropped, replace it.