LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna L, Van Passenger >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System (Service Information) >> Seat Belt Control Ecu >> Removal [12/2015 - 11/2017] >> Procedure

Removal [12/2015 - 11/2017]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [12/2015 - 08/2016] Refer to INITIALIZATION [08/2016 - 11/2017] ).

  2. REMOVE DOOR SCUFF PLATE ASSEMBLY RH 

    (Refer to PROCEDURE - Step 3 )

  3. REMOVE COWL SIDE TRIM BOARD RH 

    (Refer to PROCEDURE - Step 5 )

  4. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH 
  5. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY 

    (Refer to PROCEDURE - Step 34 )

  6. REMOVE ECU INTEGRATION BOX RH 

    (Refer to PROCEDURE - Step 6 )

  7. REMOVE SEAT BELT CONTROL ECU 
    GTY299186Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the seat belt control ECU.
      TEXT IN ILLUSTRATION

      *1 Protective Tape
scientia non olet · About LEMON Manuals