Removal [12/2018 - 07/2020]: Procedure

Refer to REMOVAL [12/2018 - 07/2020] 

1. Disconnect the fuel sender gauge assembly connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Disengage the 2 clamps to disconnect the wire harness from the fuel suction tube with pump and gauge assembly.
   NOTE:

   • Do not damage the wire harness.
   • When disengaging each wire harness from the clamp, disengage one wire at a time.
3. Disengage the 2 claws to remove the fuel gauge bracket with fuel sender gauge assembly from the fuel suction tube with pump and gauge assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   Be careful not to bend the arm of the fuel sender gauge assembly.

4. Disengage the 2 claws to remove the fuel sender gauge assembly from the fuel gauge bracket.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002