LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Yaris LE, 4D Hatchback >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Service Information) >> YAW RATE AND ACCELERATION SENSOR (for Sedan) >> Installation >> Installation

YAW RATE AND ACCELERATION SENSOR (for Sedan): Installation: Installation

  1. INSTALL YAW RATE AND ACCELERATION SENSOR 
    1. Connect the yaw rate and acceleration sensor connector.
    2. Install the yaw rate and acceleration sensor with the 2 bolts.

      Torque: 14 N*m (143 kgf*cm, 10 ft.*lbf) 

  2. INSTALL REAR CONSOLE BOX ASSEMBLY  . Refer to INSTALLATION - Step 1
  3. INSTALL CONSOLE BOX CARPET  . Refer to INSTALLATION - Step 2
  4. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 9
  5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 4
  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) 
  7. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL  . Refer to INSTALLATION - Step 5
  8. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION 

    Refer to CALIBRATION .

  9. CHECK VSC SENSOR SIGNAL 

    Refer to TEST MODE PROCEDURE .

scientia non olet · About LEMON Manuals