LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Tacoma PreRunner, 2D Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Navigation) >> Navigation System >> How To Proceed With Troubleshooting

How To Proceed With Troubleshooting

WARNING: This page is about a different car, the 2006 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. VEHICLE BROUGHT INTO A WORKSHOP 

    NEXT 

  2. DIAGNOSTIC QUESTIONING AND SYMPTOM CONFIRMATION 
    1. Ask the customer about symptoms and confirm malfunctions.

    THE SCREEN DISPLAYS NOTHING (GO TO STEP  7, AND PROCEED TO  NO IMAGE APPEARS ON MULTI-DISPLAY  

    OTHER SYMPTOMS (GO TO STEP 3) 

  3. CHECK MULTIPLEX COMMUNICATION SYSTEM (BEAN) 
    1. Use the intelligent tester to check for normal function of the body multiplex communication system.

    A CODE IS OUTPUT (PROCEED TO  MULTIPLEX COMMUNICATION  ) 

    A CODE IS NOT OUTPUT (GO TO STEP 4) 

  4. CONFIRM THE SYSTEM NORMAL CONDITION 

    APPLICABLE (THIS IS NOT A MALFUNCTION) 

    NOT APPLICABLE (GO TO STEP 5) 

  5. CHECK THE DIAGNOSTIC TROUBLE CODES 

    HINT:

    • If the system cannot enter the diagnosis mode, inspect each AVC-LAN communication signal and repair or replace problem parts.
    • Even if the malfunction symptom is not confirmed, check for diagnostic trouble codes. This is because the system stores past diagnostic trouble codes.
    • Check and clear past diagnostic trouble codes. Check the diagnostic trouble code and inspect the area the code indicates.

    A CODE IS OUTPUT (GO TO STEP 6) 

    A CODE IS NOT OUTPUT (GO TO STEP  7)

  6. DIAGNOSTIC TROUBLE CODE CHART 
    1. Find the output code on the diagnostic trouble code chart.

    NEXT: GO TO STEP  9

  7. PROBLEM SYMPTOMS TABLE 
    1. Find the applicable symptom code in the problem symptoms table.

      HINT:

      If the symptom does not recur and no code is output, perform the symptom reproduction method (See HOW TO PROCEED WITH TROUBLESHOOTING ).

    THERE IS AN APPLICABLE SYMPTOM CODE IN THE TABLE (GO TO STEP  9)

    THERE IS NO APPLICABLE SYMPTOM CODE IN THE TABLE (GO TO STEP 8) 

  8. CHECK THE ECU TERMINAL ARRANGEMENT BASED ON THE MALFUNCTION SYMPTOM 

    NEXT 

  9. CHECK THE CIRCUIT 
    1. Adjust, repair or replace as necessary.

    NEXT 

  10. RECHECK THE DIAGNOSTIC TROUBLE CODE 

    HINT:

    After deleting the DTC, recheck for diagnostic trouble codes.

    NEXT 

  11. PERFORM CONFIRMATION TEST 

    NEXT: END 

scientia non olet · About LEMON Manuals