Rear Stabilizer Bar: Removal

REMOVE REAR WHEEL
REMOVE REAR STABILIZER LINK ASSEMBLY LH
1. Remove the 2 nuts and stabilizer link.
  
  Fig 1: Removing Nuts And Stabilizer Link
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.
REMOVE REAR STABILIZER LINK ASSEMBLY RH
HINT:

Remove the RH side using the same procedures as for the LH side.
REMOVE REAR STABILIZER BAR
1. Remove the 8 bolts, 4 stabilizer brackets, 2 stabilizer bushes and stabilizer bar.
  
  Fig 2: Removing Bolts, Brackets, Bushes And Stabilizer Bar
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002