LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1997 >> 4Runner Base, 4WD, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Removal & Installation - A/T >> Torque Specifications >> Torque Specifications Sienna

Torque Specifications Sienna

TORQUE SPECIFICATIONS (SIENNA)

Application Ft. Lbs. (N.m)
Drive Plate-To-Crankshaft Bolt 61 (83)
Front Exhaust Pipe Support Bracket Bolt 15 (20)
Front Exhaust Pipe-To-Exhaust Manifold Nut 46 (62)
Front Exhaust Pipe-To-Rear Exhaust Pipe Bolt/Nut 41 (56)
Front (Radiator Side) Engine Mount Shock Absorber-To-Lower Frame Bolt 35 (47)
Front (Radiator Side) Engine Mount-To-Lower Frame Bolt/Nut
Green Bolt 49 (66)
Silver Bolt 32 (44)
Lower Frame Assembly Bracket-To-Body Bolt/Nut
Front Bolt 134 (182)
Front Nut 27 (37)
Rear Large Bolt 134 (182)
Rear Small Bolt 24 (33)
Rear Nut 27 (37)
Rear (Firewall Side) Engine Mount-To-Lower Frame Bolt/Nut 49 (66)
Stabilizer Bar Mount Bracket-To-Lower Frame Assembly Bolt 14 (19)
Starter Bolt 29 (39)
Steering Gear Assembly-To-Lower Frame Assembly Bolt/Nut 134 (182)
Torque Converter Bolt 30 (41)
Torque Converter Bracket & Hole Cover
Bolts (1)
Nuts 15 (20)
Transaxle Mount-To-Frame Nut 59 (80)
Transaxle-To-Cylinder Block Bolt
Upper Bolts (5) 49 (66)
Lower Bolts (3)
Bolt At 9-O'Clock Position 36 (48)
Except Bolt At 9-O'Clock Position 27 (37)
Wheel Lug Nut 76 (103)
Wiper Arm Nut 15 (20)
(1) Tighten bolts to 71 INCH Lbs. (8.0 N.m).