Ignition Switch
WARNING: This page is about a different car, the 1993 Toyota Tercel. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect ignition switch connector. With ignition switch in specified position, check continuity between specified terminals of ignition switch connector. See IGNITION SWITCH CONTINUITY TEST table. See Fig 1. If continuity is not as specified, replace ignition switch.
IGNITION SWITCH CONTINUITY TEST
| Application & Switch Position | Terminals (1) | Continuity Present | ||
|---|---|---|---|---|
| Lock | 1, 2, 3, 4, 5, 7 & 8 | No | ||
| Accessory | 5 & 7 | Yes | ||
| On | 2 & 3; 4, 5 & 7 | Yes | ||
| Start | 1, 2 & 3; 4, 7 & 8 | Yes | ||
|
||||