Valve Body Retainer Specifications: Notes

UPPER VALVE BODY RETAINER SPECIFICATIONS ⁽¹⁾

Application (Letter I.D.) ⁽²⁾

Height: In. (mm)

Accumulator Control Valve ("B")

.453 (11.50)

Cut-Back Valve ("D")

.362 (9.20)

Lock-Up Relay Valve ("E")

.591 (15.00)

Throttle Modulator ("A")

.362 (9.20)

2nd Coast Modulator Valve ("C")

.591 (15.00)

⁽¹⁾	Width is .197" (5.00 mm) for all retainers.

⁽²⁾	For retainer locations, see Fig 2.

LOWER VALVE BODY RETAINER SPECIFICATIONS ⁽¹⁾

Application (Letter I.D.) ⁽²⁾

Height: In. (mm)

Detent Regulator ("E")

.453 (11.50)

Secondary Regulator ("A")

.453 (11.50)

Intermediate Shift Valves ("C")

.453 (11.50)

Low Coast ("B") & 1-2 Shift Valves ("F")

.362 (9.20)

2-3 Shift Valve ("D")

.236 (6.00)

⁽¹⁾	Width is .197" (5.00 mm) for all retainers except 2-3 shift valve. The 2-3 shift valve retainer width is 315" (8.00 mm).

⁽²⁾	For retainer locations, see Fig 4.

Fig 1: Exploded View Of Upper Valve Body

Fig 2: Upper Valve Body Check Ball, Pin & Retainer Locations

Fig 3: Exploded View Of Lower Valve Body

Fig 4: Lower Valve Body Check Ball, Pin & Retainer Locations

NOTE: Valves may be held in with pins or retainers and plugs. Remove components and note locations. Arrange parts in order for reassembly reference.