Glass - Backlight (Heat Pump Model) - Remove and Replace: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Tesla Model 3, 2022 Tesla Model 3, 2021 Tesla Model 3, 2020 Tesla Model 3, and 2019 Tesla Model 3. However, it is still accessible from the selected car via links, so may be relevant.
Last modified: 15/08/2023 10:15:36
NOTE:
See Personal Protection
to make sure to wear proper PPE when performing below procedure.
Revision History:
- 2023-08-04: Add step the check the gap and flushness by referring to CVIS specification.
WARNING:
Wear appropriate personal protective equipment (PPE) including cut-resistant gloves and safety glasses when performing this procedure.
CAUTION:
For Europe only: Only technicians who have been trained in working with diisocyanates and have completed all required certification courses are permitted to perform procedures using urethane and other products containing diisocyanates. Proper personal protective equipment (PPE) must be worn when working with products containing diisocyanates.
- Ball Peen Hammer
- Equalizer Python
- Portable Bench
- Retractable Blade Knife
- Ballast Bags
- Double Suction Cup Handles
- Gap and Flush Tool
- Caulk and Adhesive Gun