Subwoofer - Remove And Replace: Remove
WARNING: This page is about a different car, the 2024 Tesla Model Y, 2023 Tesla Model Y, 2022 Tesla Model Y, 2021 Tesla Model Y, and 2020 Tesla Model Y. However, it is still accessible from the selected car via links, so may be relevant.
- Open all the doors and fully lower all the windows.
- Move the driver seat fully forward.
- Remove the 2nd row lower cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace) .
- Remove the RH lower C-pillar trim. See TRIM - C-PILLAR - LOWER - LH (REMOVE AND REPLACE) .
- Remove the rear frunk load floor. See frunk LOAD FLOOR - REAR (REMOVE AND REPLACE) .
- Remove the front frunk load floor. See frunk Load Floor - Front (Remove and Replace) .
- Remove the frunk sill trim. See Trim - Sill - frunk (Remove and Replace) .
- Remove the RH frunk side trim.
- Remove the RH upper C-pillar trim. See Trim - C-Pillar - Upper - LH (Remove and Replace) .
- Remove the nuts and bolt that attach the amplifier to the body, and then carefully set the amplifier aside.
NaN N.m (NaN ft-lbs)
Tip: Use of the following tool(s) is recommended:
- 10 mm socket
- 2 in extension
- Disconnect the subwoofer electrical connector.
- Remove the nut and bolts that attach the subwoofer to the vehicle, and then remove the subwoofer from the vehicle.
5.4 N.m (4.0 ft-lbs)
Tip: Use of the following tool(s) is recommended:
- 10 mm socket
- 2 in extension