Air Bag - Driver's - Remove And Replace: Removal

Open both front windows.
Adjust the steering column:
- Raise the steering column to its highest position.
- Fully extend the steering column.
Disconnect 12V power. See Disconnect 12V Power .
Ensure that the first responder loop has been disconnected for at least 2 minutes.
Turn the steering wheel 90 degrees for better access to the screws.
Release the screws (x2) that secure the driver's airbag to the steering wheel assembly (torque 7 N.m).
NOTE: Components have been removed in this graphic to aid clarity.

Courtesy of TESLA, INC.
Carefully release the driver's airbag from the steering wheel assembly.
WARNING: To avoid personal injury, observe all relevant safety precautions before removing or testing any SRS components.

WARNING: To avoid personal injury, eye protection must be worn when performing this operation.

Courtesy of TESLA, INC.
Disconnect the driver's airbag electrical connectors.
Remove the driver's airbag from the vehicle.
WARNING: Store the airbag module with the deployment side facing up. This will prevent it from being propelled if accidentally deployed, which might cause injury.