LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2016 >> Model S 70 >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Suspension -- Model S >> Air Suspension System >> Harness - Adaptive Air Spring Module - Front - LH - Remove And Replace >> Removal

Harness - Adaptive Air Spring Module - Front - LH - Remove And Replace: Removal

  1. Open the LH front door and lower the window.
  2. Support the vehicle on a 2-post lift, but do not raise it at this time. See Raise Vehicle - 2 Post Lift .
  3. Enable Jack Mode. See Jack Mode Activation .
  4. Remove the LH front wheel.
  5. Remove the nut (x1), bolts (x3) and clips (x2) that attach the front portion of the LH wheel arch liner to the body, and then fold back the front portion of the wheel arch liner. See Wheel Arch Liner - Front - LH (Remove and Replace) .
  6. Release the grommet that attaches the LH adaptive air spring module harness from the harness bracket.
    G14980700Courtesy of TESLA, INC.
  7. Disconnect the LH adaptive air spring module harness connector.
    G14980701Courtesy of TESLA, INC.
  8. Remove the rear center underhood apron. See Underhood Apron - Rear (Remove And Replace) .
  9. Disconnect the LH damper harness connectors (x2) from the LH front adaptive air spring module.
    G14980702Courtesy of TESLA, INC.
  10. Release the LH adaptive air spring module harness from the bracket.
    G14980703Courtesy of TESLA, INC.
  11. Remove the adaptive air spring module harness from the vehicle.
scientia non olet · About LEMON Manuals