Fender Assembly - Front - LH - Remove And Install: Removal

Remove the LH rocker panel. See Molding - Rocker Panel - LH - Remove And Replace .
Remove the rear underhood apron. See Underhood Apron - Rear - Remove And Replace .
Remove the LH underhood apron. See Underhood Apron - LH - Remove And Replace .
Remove the LH front wheel. See Wheel - Remove And Install .
Remove the screw that attaches the fascia panel to the RH front fender (torque 1.5 Nm).

Courtesy of TESLA, INC.
Release the LH fascia from the fender bracket and pull it forward to gain access to the bolt that attach the LH front fascia to fender mounting bracket to the vehicle.
Remove the bolt that attaches the LH front fascia to fender mounting bracket to the vehicle, and then release the tabs (x2) to remove the bracket (torque 4 Nm).

Courtesy of TESLA, INC.
Release the nut (x1) and clips (x5) that attach the rear half of the LH front wheel arch liner to the vehicle, and then move the liner aside. See Wheel Arch Liner - Front - LH - Remove And Replace .
Release the washer fluid reservoir and then remove the fasteners (x3) that secure the reservoir to the body of the vehicle (torque 5 Nm).

Courtesy of TESLA, INC.
Move the washer bottle aside and remove the sponge mat.

Courtesy of TESLA, INC.
Remove the bolt that attaches the inner part of the LH front fender to the vehicle.

Courtesy of TESLA, INC.
Disconnect the electrical connectors (x2) from the back side of the LH front side repeater lamp and camera assembly.

Courtesy of TESLA, INC.
Remove the bolts (x4) that attach the upper LH front fender to the vehicle.

Courtesy of TESLA, INC.
Remove the bolt that attaches the front part of the LH front fender to the vehicle.

Courtesy of TESLA, INC.
Remove the bolt that attaches the rear part of the LH front fender to the vehicle.

Courtesy of TESLA, INC.
Remove the bolts that attach the lower LH front fender to the vehicle.

Courtesy of TESLA, INC.
Remove the LH front fender assembly from the vehicle.