Air Bag - Front Passenger's - Remove And Replace: Installation
- Insert the new air bag into the top pad.WARNING: Make sure that the air bag is fully seated in the top pad before continuing this procedure.
- Reinstall the top pad.
- If the component was replaced due to an internal failure, use the Toolbox "DTCs" panel to read DTCs, and then clear all related DTCs.
- Connect a laptop with Toolbox 3 to the vehicle.
- Unlock the gateway. See Gateway Unlock
- In Toolbox 3, click the Tools tab, type "DTC" into the search field, click DTCs , and then select SDM or RCM depending on the Restraint Control Type of the vehicle.
- Click Read DTCs to display the DTCs.
- Click Clear DTCs to clear the DTCs.