LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> XL7 Base, FWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Wiring Systems >> Repair Instruction >> Relay Replacement (Within an Electrical Center) >> Removal Procedure

Removal Procedure

  1. Remove the electrical center cover.
  2. Locate the relay. Refer to ELECTRICAL CENTER IDENTIFICATION VIEWS  to locate the electrical center where the relay exists.
    NOTE:
    • Always note the orientation of the relay.
    • Ensure that the electrical center is secure, as not to put added stress on the wires or terminals.
      Fig 1: Pulling Relay From Electrical Center
      G04844958Courtesy of SUZUKI OF AMERICA CORP.
  3. Using the J 43244 (1) position the tool on opposing corners of the relay (2).
    CAUTION: Use J43244 to pull the relay straight out from the electrical center terminals. The use of pliers or a flat bladed tool could damage the electrical center.
  4. Remove the relay (2) from the electrical center.
scientia non olet · About LEMON Manuals