Front Fender: Installation
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
- Install the fender front.NOTE:
When installing the fender front, make sure that a uniform clearance is created around it.
- Fender front to Hood COMPL front: Ref. to EXTERIOR BODY PANELS>FRONT HOOD>ADJUSTMENT
- Fender front to Panel COMPL door front: Ref. to EXTERIOR BODY PANELS>FRONT DOOR>ADJUSTMENT
Tightening torque:
9 N.m (0.9 kgf-m, 6.6 ft-lb)
- Install the cover fender LWR. (CVT model)NOTE:
Open the door, and install it from the compartment side.
- Install the cover A pillar assembly. Ref. to EXTERIOR BODY PANELS>DOOR SASH (TAPE/MOLDING)>INSTALLATION>COVER A PILLAR ASSEMBLY
- Install the spoiler assembly side sill. Ref. to EXTERIOR/INTERIOR TRIM>SIDE GARNISH & SIDE SPOILER>INSTALLATION
- Install the garnish assembly fender.
- Install the mud guard front. Ref. to EXTERIOR/INTERIOR TRIM>MUD GUARD>INSTALLATION
- Install the cowl panel side. Ref. to EXTERIOR/INTERIOR TRIM>COWL PANEL>INSTALLATION
- Install the light assembly head. Ref. to LIGHTING SYSTEM>HEADLIGHT ASSEMBLY>INSTALLATION
- Install the bracket side front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT BUMPER>INSTALLATION
- Install the cover fender UPR.
- Install the bumper face front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT BUMPER>INSTALLATION
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY