Belt Assembly Third Out Ctr
CAUTION:
- Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
- Side impact sensor (under the second-row center seat) of airbag system is located under the floor mat near the second-row seat front center. Be careful not to apply strong impact to the sensor when working with the second-row seat removed.
- Turn the ignition switch to OFF.
- Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Remove the third-row seats. Ref. to SEATS>THIRD SEAT>REMOVAL .
- Lower the trim panel sub assembly. Ref. to EXTERIOR/INTERIOR TRIM>ROOF TRIM>REMOVAL
.NOTE: Procedures for the trim panel sub assembly is performed inside the vehicle.
- Remove the bolts, and then remove the belt assembly third OUT CTR.