Inspection Mode 5
| DTC | Item | Note |
|---|---|---|
| B2400 | RAIN/LIGHT SENSOR PERFORMANCE | - |
| B2401 | SENSOR INSTALLATION INCORRECT | - |
| B2402 | SENSOR INITIAL SETTING INCOMPLETE | - |
Diagnostic procedure:
- Check that no bubbles or dirt exists between windshield glass and silicon sheet and rain sensor.
- Using the Subaru Select Monitor, perform the clear memory of [Automatic Light and Wiper]. Ref. to COMMON (diag)>CLEAR MEMORY .
- Turn the ignition switch to ON.
- Perform [Sensor initial setting].
- Using the Subaru Select Monitor, read the DTC of [Automatic Light and Wiper] to check that there is no DTC displayed. Ref. to AUTOMATIC LIGHT AND WIPER (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1.