LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Forester 2.5i, Standard Trans >> Repair and Diagnosis >> Electrical >> Starter >> Starting System & Charging System (H4DO) >> Generator >> Removal >> Turbo Model

Turbo Model

  1. Remove the clip (A), lift the front of the collector cover in the direction of arrow, and then remove the collector cover.
    1. Remove the clip (A).
    2. Hold the shaded area (B) by hand and carefully pull the RH side (C) upward.
    3. Hold the shaded area (D) by hand and carefully pull the LH side (E) upward.
      G12508765Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the ground cable from battery. Ref. to NOTE>NOTE>BATTERY .
  3. Remove the brake vacuum pump. Ref. to BRAKE>Brake Vacuum Pump>REMOVAL .
  4. Remove the V-belts. Ref. to MECHANICAL (H4DOTC)>V-belt>REMOVAL>V-BELT .
  5. Remove the collector cover bracket.
    G12508766Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the connector (A) and terminal (B) from the generator.
    G12508767Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the generator from the generator bracket.
    G12508768Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the V-belt tensioner assembly. Ref. to MECHANICAL (H4DOTC)>V-belt>REMOVAL>V-BELT TENSIONER ASSEMBLY .
  9. Remove the generator bracket from the engine.
    G12508769Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals