LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Impreza Base, 4D Sedan, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (Power Rear Gate (Service Information)) >> Power Rear Gate Touch Sensor >> Removal >> Touch Sensor LWR

Touch Sensor LWR

WARNING: This page is about a different car, the 2017 Subaru Outback and 2017 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. Ref. to BATTERY
    NOTE: Repair Contents.
  2. Remove the trim panel - rear gate. Ref. to REMOVAL , Rear Gate Trim.
  3. Remove the power rear gate touch sensor LWR.
    1. Remove the screws and clips.
    2. Disconnect the connector and remove the power rear gate touch sensor LWR.
    Fig 1: Identifying Power Rear Gate Touch Sensor LWR Screws And Clips
    G10309986Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals