LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Impreza Base, 4D Sedan, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (Power Rear Gate (Service Information)) >> Memory Height Switch >> Installation

Memory Height Switch: Installation

WARNING: This page is about a different car, the 2017 Subaru Outback and 2017 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the memory height switch.
  2. Install the cover assembly - instrument panel LWR driver.
  3. Connect the ground terminal to battery sensor. Ref. to BATTERY
    NOTE: Repair Contents.
scientia non olet · About LEMON Manuals