Radio Antenna Amplifier
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Install the amplifier assembly - antenna.
Tightening torque:
12±3 N.m (1.2±0.3 kgf-m, 8.9±2.2 ft-lb)
- Install the trim panel - rear pillar UPR LH. (Sedan model)
- Install the trim panel - rear gate UPR. (OUTBACK model)
- Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>