LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Differentials) >> Rear Differential Side Oil Seal >> Replacement

Rear Differential Side Oil Seal: Replacement

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear differential. Refer to REMOVAL , Rear Differential (VA-type).
  2. Remove the rear differential side oil seal using a screwdriver wrapped with vinyl tape to prevent the side retainer from scratches.
  3. Using the ST, install the oil seal to the side retainer.

    ST 398437700 DRIFT

    Fig 1: Removing/Installing Oil Seal Using Drift
    G05032560Courtesy of SUBARU OF AMERICA, INC.
  4. Install the rear differential. Refer to INSTALLATION , Rear Differential (VA-type).
scientia non olet · About LEMON Manuals