Check Hazard Switch
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the A/C control panel.
- Manual A/C model: Refer to MANUAL A/C MODEL .
- Auto A/C model: Refer to AUTO A/C MODEL .
- Measure the resistance between hazard switch terminals.
Preparation tool: Circuit tester
- AUTO A/C MODEL
Courtesy of SUBARU OF AMERICA, INC.
Terminal No. Inspection conditions Specification 1 - 2 Switch OFF 1 MΩ or more Switch ON Less than 1 Ω - MANUAL A/C MODEL
Terminal No. Inspection conditions Specification 4 - 5 Switch OFF 1 MΩ or more Switch ON Less than 1 Ω - AUTO A/C MODEL
- Replace the A/C control panel if the inspection result is not within the standard value.