Multi-Information Display Selector: Inspection
- Remove the airbag module from the steering wheel. Refer to
REMOVAL
, Driver's Airbag Module.
- Connect tester as shown in the figure, and measure the resistance between the terminals when pressing each switch.
Courtesy of SUBARU OF AMERICA, INC. SWITCH RESISTANCE CHART
| Switch |
Resistance |
| Not pressed. |
1 MΩ or more |
| Press ↑. |
10MΩ or less |
| Press i/SET. |
Approx. 1 kΩ |
| Press ↓. |
Approx. 3.67 kΩ |
- If resistance is out of specifications shown in the above table, a fault in switch is indicated. Replace the switch. Refer to
REMOVAL , Multi-Information Display Selector.