LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System & Door Lock System - Security And Locks >> Ignition Key Lock >> Replacement

Ignition Key Lock: Replacement

  1. Disconnect the ground cable from the battery.
  2. Remove the steering column. <Ref. to REMOVAL , Tilt Steering Column.>
  3. Secure the steering column in a vise. Remove the bolt with a drill.
    Fig 1: Removing Bolt With Drill
    G05672197Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the ignition key lock.
  5. Using a new bolt, tighten the bolts all the way.
    Fig 2: Identifying Ignition Key Lock And Bolt
    G05672198Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals