LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Forester X, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension >> Rear Crossmember >> Installation

Rear Crossmember: Installation

  1. Install in the reverse order of removal.
    NOTE:
    • Discard the loosened self-locking nut and replace it with a new one.
    • Always tighten the nut (not adjusting bolt), when tightening adjusting bolt.
  2. Install the rear differential.

    < Ref. to INSTALLATION , Rear Differential. >

  3. Always tighten the rubber bushing when wheels are in full contact with the ground and vehicle is curb weight.
  4. Inspect the wheel alignment and adjust if necessary.
scientia non olet · About LEMON Manuals