LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Overhaul) >> Reduction Drive Gear >> Removal

Reduction Drive Gear: Removal

WARNING: This page is about a different car, the 2003 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission assembly from the vehicle. See REMOVAL , Automatic Transmission Assembly.
  2. Remove rear vehicle speed sensor, and separate the extension case from transmission case. See REMOVAL , Extension Case.
  3. Remove the reduction driven gear. See REMOVAL , Reduction Driven Gear.
  4. Using ST, extract the reduction drive gear.

    ST1 499737100 PULLER

    ST2 899524100 PULLER SET

    Fig 1: Extracting Reduction Drive Gear Using ST
    G01998984Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals