LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1992 >> Legacy LSi, FWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Diagnostic Code Charts >> Operation Of Self-Diagnostic System In "No Trouble" Condition

Operation Of Self-Diagnostic System In "No Trouble" Condition

OPERATION OF SELF-DIAGNOSTIC SYSTEM - NO TROUBLE MENU (1)

Mode Read Memory Connector Test Mode Connector Engine Condition Check Engine Light
U-check X X Key ON, Engine OFF ON
" " " Engine ON OFF
Read Memory O X Key ON, Engine OFF Blink
" O X Engine ON ON
D-Check X O Key ON, Engine OFF ON
" X O Engine ON (2) OFF To Blink
Clear Memory O O Key ON, Engine OFF ON
" O O Engine ON (2) OFF To Blink
(1) O = Connect; X = Disconnect.
(2) When the engine operates at a speed greater than 2,000 rpm for more than 40 seconds, the check engine light blinks. However, when all check items check out "OK", even before the 40 seconds is reached, the check engine light blinks.
scientia non olet · About LEMON Manuals