DTC P0711: Transmission Fluid Temperature Sensor "A" Performance: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine and ECT / DTC / Current or Pending.
5. Read the DTCs using the Techstream.
   RESULT
   
   

   Result	Proceed to
   Only P0711 is output	A
   P0711 and other DTCs are output	B

   HINT: 

   If any other DTCs besides P0711 are output, perform troubleshooting for those DTCs first.

B → See step   5 

A: Go to next step 

1. Check the CVT fluid level. Refer to ADJUSTMENT .

   OK

   CVT fluid level is correct.

NG → ADD FLUID 

OK: Go to next step 

1. Replace the continuously variable transaxle assembly. Refer to REMOVAL .

NEXT: Go to next step 

NEXT → END