Section 10 (Automatic Transmission, VT25-E (Troubleshooting))
WARNING: This page is about a different variant/trim than selected.
- Troubleshooting
- Symptoms - Automatic Transmission
- Clearing Transmission Diagnostic Trouble Codes
- Transmission Fluid Checking Procedure
- Line Pressure Check Procedure
- Road Test Procedure
- Torque Converter Diagnosis Procedure
- Flexplate/Torque Converter Vibration Test
- Noise and Vibration Analysis
- Clutch Plate Diagnosis
- Engine Coolant/Water in Transmission
- Fluid Leak Diagnosis
- Case Porosity Repair
- Transmission Overheats
- Line Pressure Instability
- Low Line Pressure
- High Line Pressure
- Automatic Transmission Fluid Leaks
- Final Drive Noise or Hum Noise
- Whine/Growl Noise That Changes with Vehicle Speed
- Noisy in Reverse Only
- Reattaching Noise
- Whine Noise Varying with RPM or Fluid Pressure
- Gravel or Grating Noise
- Moaning Noise
- Transmission Clunk on Acceleration or Deceleration
- Rattle Noise
- Vibration
- No Drive in Forward Ranges
- Slips in Drive
- No Reverse
- Slips in Reverse
- No Forward and Reverse
- No Low or Reverse
- No Park
- Transmission Does Not Shift Out of Park
- Stays in Drive
- Stays in Low
- Stays in Intermediate
- Stays in Reverse
- Range Selector Displays Incorrect Range
- Harsh Garage Shift
- Poor Driveability - Poor or No Ratio Control
- No Torque Converter Clutch (TCC) Apply/TCC Slipping/Soft TCC Apply
- Torque Converter Clutch (TCC) Stuck On
- Harsh Torque Converter Clutch (TCC) Apply
- Torque Converter Clutch (TCC) Slipping