LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2000 >> SL2 Automatic, MP7 >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Exhaust System >> Removal And Installation >> Exhaust Manifold Heat Shield >> Removal

Exhaust Manifold Heat Shield: Removal

  1. Disconnect oxygen sensor connector from wiring harness.
  2. Remove bolts.
  3. Remove heat shield.
  4. Remove spacers from exhaust manifold (if removing exhaust manifold).
    Fig 1: Identifying Heat Shield And Spacers
    G01068120Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals