LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2000 >> SC1 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Starting System) >> Removal & Installation >> Transaxle Position Switch (A/T) >> Installation ("L" Series)

Installation ("L" Series)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2001 Saturn LW300, 2001 Saturn LW200, 2001 Saturn L300, 2001 Saturn L200, and 2001 Saturn L100. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install transaxle position switch. Tighten transaxle position switch bolts to specification. See TORQUE SPECIFICATIONS  . Install transaxle control lever. Tighten transaxle control lever nut to specification.
  2. Install shift control cable. Ensure engine starts only in Park or Neutral position. If engine starts in any other position, adjust transaxle range switch. See TRANSAXLE POSITION SWITCH (A/T)  under ADJUSTMENTS. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals