Wiper/Washer Switch
Remove steering column covers to access connectors on back of multifunction switch (combination switch). Disconnect wiper/washer switch connector from right side of multifunction switch. Measure resistance across switch terminals. See WIPER/WASHER SWITCH RESISTANCE table. See Fig 1 . If resistance is not as specified, replace rear wiper/washer switch.
WIPER/WASHER SWITCH RESISTANCE
| Switch Position | Terminals (1) | Resistance In Ohms | ||
|---|---|---|---|---|
| OFF | C & D | Less Than 1 | ||
| ON | B, C & D | Less Than 1 | ||
| WASH | B, C & D | Infinite (Open) | ||
|
||||