LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-7X Arc >> Repair and Diagnosis >> Body & Frame >> Seats >> Repair Instructions >> Seat Back Frame Replacement - Front >> Removal Procedure

Removal Procedure

  1. Remove the seat assembly from the vehicle. Refer to Seat Replacement - Front Bucket .
  2. Remove the seat trim panel. Refer to Seat Cushion Outer Trim Panel Replacement .
  3. Remove the front seat back. Refer to Seat Back Replacement - Front .
  4. Remove the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
  5. Remove the front seat back panel. Refer to Seat Back Panel Replacement - Front .
  6. Remove the lumbar assembly. Refer to Lumbar Replacement - Front Seat .
  7. Remove the seat belt and retractor assembly. Refer to Seat Belt Replacement - Front .
    8. Fig 1: Removing/Installing Inflatable Side Impact Module Screw
    GM753528Courtesy of GENERAL MOTORS CORP.
  8. Remove 2 screws (1) securing the inflatable side impact module to the seat back frame.
    9. Fig 2: Removing/Installing Side Impact Module Tub Push Pins
    GM753530Courtesy of GENERAL MOTORS CORP.
  9. Remove the 2 push pins (1) securing the side impact module tub to the seat back frame.
    10. Fig 3: Removing/Installing SIR Wiring Harness, Clips & Lumbar Wiring Harness
    GM753527Courtesy of GENERAL MOTORS CORP.
  10. Remove the SIR wiring harness (1) from the seat back frame.
  11. Remove the lumbar wiring harness (3) from the seat back frame.
  12. Remove the wiring harness clips (2) from the seat back frame.
scientia non olet · About LEMON Manuals