Adjusting rear toe angle
- Use a 4-column lift to raise the car so that the wheels are under pressure.
- Fasten the longitudinal links with FIXTURE 89 96 795
- Slightly undo the bolts to the body bracket of one of the longitudinal links.
- Using Sleeve 89 96 811, move the bracket outwards or inwards. Move it inwards to increase toe-in.
Check the value.
- Tighten the bolts.
Tightening torque 90 Nm +30° (70 lbf ft +30°)
- Repeat steps 3-5 on the other side.
- Treat the body with corrosion protection.
- Proceed with ADJUSTING FRONT TOE ANGLE .