LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2010 >> Cayenne Turbo >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> 28 - Ignition System >> WM 282020 Removing And Installing DFI Bar Ignition Modules (Except Cayenne Diesel) >> Preliminary Work

Preliminary Work

  1. Switch ignition off and remove ignition key
  2. Separate the six bar ignition modules from the wire harness. To do this, press the connectors down slightly, release and remove them using the assembly tool T10118  or a suitable aid (e.g. an angled piece of wire). -1- 
    Fig 1: Removing Cable Plugs
    G09410360Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals