Installation Procedure
WARNING: This page is about a different car, the 2006 Pontiac Torrent and 2006 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Position the fog lamp housing to the front fascia.
- Install the front fog lamp adjuster screw (1), turn the screw in the number of turns from documented during removal.
- Install the 2 lower screws (2) from the rear of the fog lamp housing.
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the fog lamp bulb into the socket, if needed.
- Install the fog lamp bulb socket (1) into the housing.
- Position the front flap of the wheelhouse liner back into place.
- Install the wheelhouse liner push-in retainers (1).
NOTE:
Refer to Fastener Notice
in Cautions and Notices.