LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> G6 Base, 2.4 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Rear Parking Assist System) >> Repair Instructions >> Object Alarm Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Parking Assist (RPA) Receiver Electrical Connector
    GM1357333Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear window shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.
  2. Disconnect the rear parking assist (RPA) receiver electrical connector (2).
    3. Fig 2: RPA Receiver
    GM1357202Courtesy of GENERAL MOTORS CORP.
  3. Remove the fasteners from the RPA receiver.
  4. Remove the receiver from the rear shelf.
scientia non olet · About LEMON Manuals