LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> GTO Standard >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Steering Column Trim Covers Replacement >> Installation Procedure

Installation Procedure

  1. Position the lower cover over the steering column position locking lever.
  2. Slide the lower cover forward and engage the tab.
    3. Fig 1: View Of Ignition Lock Illumination Socket & Bulb, Theft Deterrent Reader Assembly & Electrical Connector
    GM1381615Courtesy of GENERAL MOTORS CORP.
  3. Install the illumination socket (1) to the theft deterrent reader assembly (3).
  4. Connect the connector (4) to the reader assembly.
    5. Fig 2: View Of Steering Column Trim Covers & Components
    GM1381605Courtesy of GENERAL MOTORS CORP.
  5. Position the reader assembly on the lower cover (3).
  6. Position the upper cover (1) on the column, engage the tab, and lower the cover.
  7. Engage the 2 tabs (2) in order to retain the upper cover to the lower cover.
  8. Install the screw (5) in order to retain the lower cover to the column.
  9. Raise the steering column position locking lever (4).
  10. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
scientia non olet · About LEMON Manuals