LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Aztek Base, FWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Rubber Conduit Replacement - Rear Door >> Removal Procedure

Removal Procedure

    Fig 1: View Of Rear Door Wiring Harness
    GM459522Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Mark the location and the color of the wires to the electrical socket before removing the wires.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure (LA1) in Engine Electrical.
  2. Remove the conduit from the center pillar.
  3. Disconnect the rear door wiring harness electrical connector.
  4. Disconnect the wire harness retainer from the wiring harness socket.
  5. Remove the wiring harness wiring one at a time from the socket.
  6. Remove the rubber conduit from the rear door.
  7. Remove the wiring harness wiring from the rubber conduit.
scientia non olet · About LEMON Manuals