LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 2001 >> Neon Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Controls - Basic Engine Testing) >> Fuel System >> Fuel Pressure Release >> Avenger & Sebring Coupe (V6)

Avenger & Sebring Coupe (V6)

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2000 Plymouth Neon, 2000 Plymouth Breeze, 2000 Dodge Stratus, 2000 Dodge Neon, and 2000 Dodge Intrepid. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear seat cushion. Remove protector for access to fuel pump electrical connector. Fuel pump electrical connector is located on top of fuel tank. Disconnect fuel pump electrical connector from wiring harness.
  2. Start engine and allow engine to idle until engine stalls. Turn ignition switch to OFF position. Reinstall fuel pump electrical connector, protector and rear seat cushion. Fuel system components may now be serviced. Cover fuel lines with shop towel before disconnecting, as some residual fuel pressure may exist.
scientia non olet · About LEMON Manuals