LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1976 >> Arrow Base, Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Ignition System >> Electronic Lean Burn >> Adjustments >> Ignition Timing & Throttle Position Transducer >> 1976-77 Models

1976-77 Models

  1. With temperature sensor below 135°F, start engine and wait 90 seconds. Using a jumper wire, ground carburetor sensor and disconnect transducer electrical lead. Check and adjust timing to specification. Reconnect transducer and note ignition timing.
  2. To obtain specified timing, loosen transducer lock nut. Turn transducer clockwise if timing is too great, counterclockwise if below specifications. When timing is set, turn transducer an additional 1/2 turn clockwise, then tighten lock nut.
scientia non olet · About LEMON Manuals