LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2004 >> Silhouette GLS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Seal Replacement >> Removal Procedure

Removal Procedure

  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: Locating Right Exhaust Manifold Pipe Stud Nuts
    GM372621Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Catalytic Converter Movement Notice in Cautions and Notices.
    IMPORTANT: Use caution handling the pipe that contains an oxygen sensor. Do not cut the wire. For removal or repositioning disconnect the connector.
  2. Remove the right exhaust manifold pipe stud nuts from the exhaust manifold studs.
    3. IMPORTANT: Suitably support the exhaust system where hangers are removed.
  3. In order to remove the exhaust seal disconnect any hangers necessary to reposition the exhaust system.
  4. Reposition the exhaust system.
    5. Fig 2: View Of Exhaust Manifold Pipe Gasket
    GM107855Courtesy of GENERAL MOTORS CORP.
  5. Remove the exhaust manifold pipe gasket.
scientia non olet · About LEMON Manuals